toast7
Joined: 21 Jun 2006
Posts: 1
|
 Posted: Wed Jun 21, 2006 6:58 pm Post subject: |
 |
|
I have a Potterton Netaheat 10-16 mk2 F. This morning it worked fine, but tonight there is no pilot.
There are no lights at all on the wall timer unit - where the heating and hot water would normally have an orange LED light if the boiler was on.
I don't know how to relight the pilot - I think it always did this automatically before. I can't get any door/panel to open on the unit, and the only control is the main pressure/temperature dial thing on the front.
If I switch the heating or hot water switches on, there are no noises at all - no clicks, fans, buzzes, whirs or otherwise. Totally dead.
Could it have blown a fuse? If so, can I replace it myself?
|
|
Chris
Joined: 07 Oct 2001
Posts: 3028
|
| Posted: Thu Jun 22, 2006 5:54 am Post subject: |
|
|
Possibly and possibly.
Undo single central screw if it's still there between the lettering, pull knob off on and withdraw the lower metal cover. You will see a 32mm 1 Amp fuse. You can test it but if it's blown, it will be for a reason. Nothing else you can DIY on this boiler.
|
|
